Resultados del 1 al 3 de 3
  1. #1

    Amplificador Crest Audio CC 4000

    Amigos.

    Estoy interesado en adquirir un amplificador y he estado revisando las características del CC 4000 de Crest Audio. He trabajado mucho con otros modelos de esta marca (Pro, CA, V, VX) y son excelentes pero no tengo ninguna referencia de este modelo.

    Algunos de ustedes lo ha utilizado?



    Power Specifications 8Ω stereo* 4Ω stereo* 2Ω stereo* 4Ω bridged**
    CC 4000 800 W 1,350 W 2,000 W 4,000 W
    CC 2800 595 W 965 W 1,400 W 2,800 W
    CC 1800 450 W 700 W 900 W 1,850 W
    * 1kHz @ <0.05% T.H.D+N / **1Khz @ <0.1% T.H.D+N
    (CC 2800 shown)
    FEATURE OVERVIEW:
    • Toroidal power transformer
    • Dual, variable speed fans on CC 2800 and CC 4000,
    single fan on model CC 1800
    • Balanced XLR inputs
    • Speakon® and 5-way binding post speaker outputs
    • Mode selector switch for stereo, parallel and
    bridged-mono operation
    • Input sensitivity selection
    • Recessed, stepped attenuators
    • Front panel circuit-breaker switch
    • Five year warranty*
    TOURCLASS/PROTECTION CIRCUITS
    ACL™ (Active Clip Limiting) prevents speaker damage by
    providing gentle gain reduction when the signal approaches the
    clipping threshold.
    IGM (Instantaneous Gain Modulation) monitors speaker loads
    to detect conditions that may overstress output devices. This allows
    safe operation into nominal 2Ω speaker loads.
    AUTORAMP™ gradually increases gain to the attenuator level
    settings when the amplifier is turned on. This prevents abrupt turn-on
    level.
    Other protection features include: short circuit, DC voltage,
    comprehensive thermal management and current in-rush turn-on/off
    transient and subsonic input.
    DESCRIPTION
    Crest Audio CC Series amplifiers are designed to achieve
    unsurpassed sonic performance and long-term reliability under
    extreme stress in touring or fixed installation applications.
    Absolute sonic accuracy is the hallmark of every Crest amplifier.
    Bass is solid and defined to the limits of audibility with ample
    current reserves. Wide-bandwidth output devices ensure
    detailed, transparent high frequency response. And, thanks to
    Crest’s exclusive IGM™ circuit, the CC Series will drive 2Ω
    loads safely without compromising performance.

    Product Specifications CC™ Series
    CC 1800 CC 2800 CC 4000
    Stereo Power: 8Ω 450 W 595 W 800 W
    4Ω 700 W 965 W 1,350 W
    2Ω 900 W 1,400 W 2,000 W
    Bridged Mono Power: 4Ω 1,850 W 2,800 W 4,000 W
    Output Voltage RMS 73 V 82 V 93 V
    8Ω and 4Ω Stereo Power ratings @1kHz, <0.05% THD+N both channels driven 2Ω stereo & 4Ω Bridged Mono Power ratings @1 kHz, <0.1%THD+N
    Frequency Response 10 Hz – 100 kHz; +0, -2 dB at 1 watt
    Power Bandwidth 10 Hz – 35 kHz; +0, -3 dB at rated 4Ω power
    Damping factor 8Ω @ 20 Hz to 1 kHz 150:1 500:1 500:1
    Input CMRR @ 1 kHz > -75 dB > -65 dB > -65 dB
    Gain selectable between x40 (32 dB) and x20 (26 dB)
    Input Sensitivity (x40) 1.32 V +/- 3% for 1 kHz, 2Ω rated
    power
    1.7 V +/- 3% for 1 kHz, 4Ω rated
    power
    1.88 V +/- 3% for 1 kHz, 4Ω rated
    power
    Input Impedance 15kΩ Balanced
    Hum and Noise A-weighted @ Rated power 8Ω -106 dB -111 dB -112 dB
    Crosstalk 1kHz @ rated power 8Ω -55 dB -65 dB -65 dB
    Class modulated rail, H switched rail, H switched rail, H
    Power Supply Linear with toroid transformer
    Current Draw @ 120 VAC 1/8 power 8Ω 400 W 3.4 A 570 W 4.75 A 720 W 6 A
    4Ω 685 W 5.71 A 880 W 7.34 A 1,185 W 9.86 A
    2Ω 1,000 W 8.34 A 1,250 W 10.41 A 1,825 W 15.21 A
    1/3 power 8Ω 1,000 W 8.34 A 1,355 W 11.30 A 1,835 W 15.30 A
    4Ω 1,650 W 13.75 A 2,220 W 18.5 A 2,975 W 24.8 A
    2Ω 2,340 W 19.5 A 2,905 W 24.3 A 4,535 W 37.8 A
    Thermal Emissions 1/3 power, 4Ω BTU/hr 2631 3579 4545
    Cooling Back to front via 1 variable speed fan Back to front via 2 variable speed fans
    Input connectors Balanced female XLR
    Output connectors Speakon® connectors and five-way binding post
    Controls
    front panel: twin recessed stepped attenuators, circuit breaker/power switch
    rear panel: mode select, gain select
    LED indicators Signal presence, ACL™ (Active clip limiting), Active status, Temp
    Construction 16-gauge steel chassis, cast aluminum front panel
    Dimensions 3.5" x 19" x 14.875" (16.125" to rack ears) 88.9 mm x 482.6 mm x 377.8 mm (409.6 mm to rack ears)
    Weight 32.6 lbs. (14.8 kg) 39.8 lbs. (18.05 kg.) 43.3 lbs. (19.64 kg.)

  2. #2

    Cc 4000

    SABES YO TENGO 2 DE ESTOS Y ANDAN BASTANTE BIEN, DE HECHO YO LOS TENGO DESDE QUE LLEGARON A CHILE Y NO ME HA DADO PROBLEMAS TRABAJALO HASTA 3 PARLANTES POR LADO EN ESTEREO PORQUE EST EPOWER AL CONTRARIO DE UN CA 12 TRABAJO CALIENTE Y POR ESO NO LO PROBE EN 2 OHMS:
    AUNQUE ESTE POWER PARA MEDIOS ES FENOMENAL PARA BAJOS SE QUEDA UN POCO EN EL GOLPE PERO ANDA BIEN, YO LO USO CON 6 MLS4 CLONES CON JBL Y NO HAY PROBLEMA
    SANTANDER AUDIO

  3. #3
    Buenas !!..Quisiera saber si alguien me puede ayudar ..necesito referencias sobre la potencia marca KAM modelo 3500hc..alguien me puede decir que tal son estas potencias ..gracias

Temas similares

  1. Crest Audio CC 4000 vs American Audio V5000 plus
    Zenemig Hernández Montesinos en el foro FoRS Semi-PRO
    Resp.: 13
    Último mensaje: 14 jun 2010, 13:27
  2. Crest cc 4000
    Joel Aguilar Aparicio en el foro FoRS PRO
    Resp.: 5
    Último mensaje: 08 jul 2009, 21:13
  3. Conversion a 220v de crest cc 4000
    Guillermo Gayo en el foro FoRS Semi-PRO
    Resp.: 5
    Último mensaje: 14 may 2009, 12:59
  4. Diagrama Amplificador >Crest Audio CA 12
    Edgar Lopez en el foro FoRS Semi-PRO
    Resp.: 2
    Último mensaje: 18 nov 2008, 23:27
  5. Dieferencia Entre Crest Audio Y Crest Performance
    Edwin Manolo Solares Herrarte en el foro FoRS Semi-PRO
    Resp.: 4
    Último mensaje: 14 sep 2007, 17:33

Permisos de publicación

  • No puedes publicar nuevos temas
  • No puedes publicar respuestas
  • No puedes adjuntar archivos
  • No puedes modificar tus mensajes
  •