Zenemig Hernández Montesinos
29 jun 2007, 16:54
Amigos.
estoy interesado en adquirir un nuevo amplificador y encontre una opción interesante... el modelo V5001 de AMERICAN AUDIO...
Alguno de ustedes ha tenido experiencia con este amplificador?? He trabajado con el modelo V5000 plus y no suena nada mal... por supuesto... con presupuesto ajustado.
V5001 Plus
Rugged Professional Power Amplifier
Output Power:
• 2 ohms, 1 khz 1% THD 2150W RMS per channel
• 4 ohms, 1 khz 1% THD 1500W RMS per channel
• 8 ohms, 1 khz 1% THD 980W RMS per channel
• (Bridged Mode, mono)
• 4 ohms, 1 khz 1% THD 4250W RMS per channel
• 8 ohms, 1 khz 1% THD 3100W RMS per channel
Total Harmonic Distortion (THD):
• Less than 0.03% (20Hz-20kHz, @ 4 Ohms)
Input Sensitivity & Impedance:
• 1.0v rms (0 dBv) (@ 8 Ohms)
Dimensions & Weight:
• Height : 5.25” (13.3cm)
• Width: 19” (48.3cm)
• Depth: 15.9” (40.5cm)
• Weight: 62 lbs (28 kg)
Frequency Response:
• ±.5dB, 1W RMS 8 ohms (10Hz - 35 kHz)
• ±3dB, 1W RMS 8 ohms (5Hz - 85 kHz)
Hum & Noise:
• 100 dB, unweighted (@ 8 Ohms)
Signal to Noise Ratio:
• 100 dB , unweighted (@ 4 ohms full power) “A” Weighted
Slew Rate:
• 25v/usec
Damping Factor:
• 400 (@ 8 Ohms)
Protection Circuit:
• DC output protection, Overload protection
• Short circuit protection, On & Off protection
Special Features:
• Sub Woofer
• Crossover 20-200Hz
• LED mode indicator
• Contractor Smart™ Feature (Switch on rear panel to disable front volume controls)
Power Consumption:
• 45A @ 120V AC (@ 4 Ohms) / 22.5A @ 240V AC (@ 4 Ohms)
Turn-On Thump Protection:
• Yes
Cooling System:
• Dual 2 speed fans & heatsink
Gracias por sus opiniones.
Saludos
estoy interesado en adquirir un nuevo amplificador y encontre una opción interesante... el modelo V5001 de AMERICAN AUDIO...
Alguno de ustedes ha tenido experiencia con este amplificador?? He trabajado con el modelo V5000 plus y no suena nada mal... por supuesto... con presupuesto ajustado.
V5001 Plus
Rugged Professional Power Amplifier
Output Power:
• 2 ohms, 1 khz 1% THD 2150W RMS per channel
• 4 ohms, 1 khz 1% THD 1500W RMS per channel
• 8 ohms, 1 khz 1% THD 980W RMS per channel
• (Bridged Mode, mono)
• 4 ohms, 1 khz 1% THD 4250W RMS per channel
• 8 ohms, 1 khz 1% THD 3100W RMS per channel
Total Harmonic Distortion (THD):
• Less than 0.03% (20Hz-20kHz, @ 4 Ohms)
Input Sensitivity & Impedance:
• 1.0v rms (0 dBv) (@ 8 Ohms)
Dimensions & Weight:
• Height : 5.25” (13.3cm)
• Width: 19” (48.3cm)
• Depth: 15.9” (40.5cm)
• Weight: 62 lbs (28 kg)
Frequency Response:
• ±.5dB, 1W RMS 8 ohms (10Hz - 35 kHz)
• ±3dB, 1W RMS 8 ohms (5Hz - 85 kHz)
Hum & Noise:
• 100 dB, unweighted (@ 8 Ohms)
Signal to Noise Ratio:
• 100 dB , unweighted (@ 4 ohms full power) “A” Weighted
Slew Rate:
• 25v/usec
Damping Factor:
• 400 (@ 8 Ohms)
Protection Circuit:
• DC output protection, Overload protection
• Short circuit protection, On & Off protection
Special Features:
• Sub Woofer
• Crossover 20-200Hz
• LED mode indicator
• Contractor Smart™ Feature (Switch on rear panel to disable front volume controls)
Power Consumption:
• 45A @ 120V AC (@ 4 Ohms) / 22.5A @ 240V AC (@ 4 Ohms)
Turn-On Thump Protection:
• Yes
Cooling System:
• Dual 2 speed fans & heatsink
Gracias por sus opiniones.
Saludos