PDA

Ir a la versi๓n completa : Refozando Equipo



Alejandro Montiel
19 may 2012, 10:41
Hola a todos.
Esta es mi primera pregunta en el foro espero me puedan ayudar
En 15 dias tengo un evento para 300 personas necesito comprar mas equipo.
Tengo 2 Cajas ElectroVoice i 25 quiero saber que amplificador es el adecuado para manejarlas y con que cajas de bajos las puedo reforzar.
En espera de su respuesta Agradeciendo de antemano, saludos desde tierra azteca.

Pablo (boi) Garrido
20 may 2012, 12:52
Bienvenido al foro, esto te puede ayudar....

http://www.qscaudio.com/products/amps/advanced_amp_selector.htm

Alejandro Montiel
24 may 2012, 13:15
Muchas gracias por tomarte el tiempo de responder mi pregunta Pablo me fue de gran ayuda.
Ahora que se que potencia necesito para mis cajas me gustaria que me recomendaras que amplificador comprar, encontre 2 que estan dentro de mi presupuesto me gustaria saber tu opinion

Peavey pv 2600

• - 2x550 watts at 8 ohms
- Massive toroidal transformer and storage capacitors
• - Peavey patented Turbo-Vฎ cooling system with 2-speed demand-sensitive fan
• - Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output
• - DDT™ soft limiter protects amp and speakers
• - 14 gauge steel chassis
• - Rear rack supports
• - Mil spec fiberglass circuit boards
• - Current in-rush limiter
• - Overheat, short circuit, clip limiting, DC, and faulty load protection
• - Detent gain controls
• - Neutrikฎ Speakonฎ and 5-way binding post outputs
• - 5-year warranty
• - 2x900 watts at 4 ohms
• - Weight Unpacked: 37.50 lb(17.01 kg)
• - Weight Packed: 47.00 lb(21.319 kg)
• - Width Packed: 6"(15.24 cm)
• - Height Packed: 22.5"(57.15 cm)
• - Depth Packed: 21"(53.34 cm)

Cerwin Vega cv 2800
• Frequency Response: 0/-0.5dB ; 20Hz-20KHz, 0/-3dB: 5Hz-60KHz
• Rated Output Power (Stereo): 600 watts at 8 ohms; 900 watts at 4 ohms; 1400 wats at 2 ohms
• Rated Output Power (Mono): 1800 watts at 8 ohms; 2800 watts at 4 ohms
• At Full Power @4 ohms: 32A / 16A
• Signal to Noice Ratio: 20 Hz - 20k Hz - 104dB
• Distortion (SMPTE-IM): .04% • Frequency Response: 0/-0.5dB ; 20Hz-20KHz, 0/-3dB: 5Hz-60KHz
• Rated Output Power (Stereo): 600 watts at 8 ohms; 900 watts at 4 ohms; 1400 wats at 2 ohms
• Rated Output Power (Mono): 1800 watts at 8 ohms; 2800 watts at 4 ohms
• At Full Power @4 ohms: 32A / 16A
• Signal to Noice Ratio: 20 Hz - 20k Hz - 104dB
• Distortion (SMPTE-IM): .04%
• Output Circuitry: H
• Damping Factor (400 Hz): 350
• Output Circuitry: H
• Damping Factor (400 Hz): 350

El costo de estos amplificadores esta entre 6000 y 8000 pesos
Gracias y Saludos