PDA

Ver la Versión Completa : Cres Audio Cc5500 Que Opinan de Este Amplificador??



Alberto Cardenas
15 mar 2014, 16:09
BUENAS HORAS AMIGOS EXPERTOS DEL FORO QUE ME RECOMIENDAN DE ESTE AMPLIFICADOR QUISIERA USARLO PARA COLOCARLE 2 BAJOS DE 18 P300 DEL MODELO NUEVO DE 2000W Y 1000CONTINUOS COLOCADOS EN CAJAS SL36. ESPERO SUS RESPUESTA PARA QUE ME AYUDEN A DECIDIR QUE COMPRAR. YA QUE E ESTADO PENSANDO E EL CV5000 DE CERVIN VEGA PERO TIENE FACTOR DAMPING DE 300 Y QUIERO ALGO BIEN POTENTE PÈRO ACCESIBLE AL BOLSILLO EN VENEZUELA TODO ESTA CARISIMO.

AQUI ESPECIFICACIONES :

Rated power bridge mode 4 Ohms: 5,500 Watts @ 1 kHz at <0.1% T.H.D.
Rated power bridge mode 8 Ohms: 3,700 Watts @ 1 kHz at <0.1% T.H.D.
Rated power (2 x 2 Ohms): 2,750 Watts per channel @ 1 kHz <0.1% T.H.D. both channels driven
Rated power (2 x 4 Ohms): 1,800 Watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven
Rated power (2 x 8 Ohms): 1,150 Watts per channel @ 1 kHz at <0.025% T.H.D. both channels driven
Rated power (1 x 2 Ohms): 3,600 Watts @ 1 kHz at <0.1% T.H.D.
Rated power (1 x 4 Ohms): 2,200 Watts @ 1 kHz at <0.05% T.H.D.
Rated Power (1 x 8 Ohms): 1,280 Watts @ 1 kHz at <0.025% T.H.D.
Minimum load impedance: 2 Ohms
Maximum RMS voltage swing: 115 Volts
Frequency response: 10 Hz - 100 kHz;+0,-3 dB at 1 Watt
Power bandwidth: 10 Hz - 30 kHz; +0, -3 dB at rated 525 Watts 8 Ohm power
T.H.D. (2 x 2 Ohms): <0.2% @ 1,900 Watts per channel from 20 Hz to 20 kHz
T.H.D. (2 x 4 Ohms): <0.05% @ 1,525 Watts per channel from 20 Hz to 20 kHz
T.H.D. (2 x 8 Ohms): <0.05% @ 1,000 Watts per channel from 20 Hz to 20 kHz
Input CMRR: >-63 dB @ 1 kHz
Voltage gain: x 40 (32 dB) or x 20 (26 dB)
Crosstalk: >-67 dB @ 1 kHz at rated power @ 8 Ohms
Hum and noise: >-110 dB,“A” weighted referenced to rated power @ 8 Ohms
Slew rate: >10V/us
Damping factor (8 Ohms): >400:1 @ 20 Hz - 1 kHz
Phase response: +5 to -15° from 20 Hz to 20 kHz
Input sensitivity: (x 40) 2.18 Volts ±3% for 4 Ohm rated power, 2 Volts ±3% for 1 kHz 2 Ohm rated power
Input sensitivity: (x 20) 1.89 Volts ±3% for 4 Ohm rated power, 4 Volts ±3% for 1 kHz 2 Ohm rated power
Input impedance: 15 k Ohms balanced, 7.5 k Ohms unbalanced
Current Draw @ 1/8 power: 2,640 Watts @ 2 Ohms; 1,140 Watts @ 4 Ohms
Current Draw @ 1/3 power: 5,920 Watts @ 2 Ohms, 4,150 Watts @ 4 Ohms
Thermal Emissions @ 1/3 power: 6,000 @ 4 Ohms bridged
Class: Switched rail, H
Country of manufacture: China

Cooling: Two temperature dependant variable speed 80 mm high output DC fans
Controls: Two front panel attenuators, rear panel mode switch and gain select switch
Indicator LEDs: 2 ACL (clip limiting), 2 signal presence, 2 temp limit, 2 active
Protection: Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors: Combi 1/4” & XLR, Speakon and Binding Post output, 120 Volt 30 amp twist lock connector, 240/230 Volt 20 amp IEC mains
Construction: 16 ga. steel with cast front panel
Dimensions: 89 mm x 482.6 mm x 377.8 mm + 31.8 mm for rear support ears and connectors (3.5” x 19” x 14.875” + 1.25”)
Net weight: 21.32 kg. (47 lbs.), Gross weight: 22.9 kg. (50.5 lbs.)