Resultados del 1 al 10 de 13
Vista en árbol
-
03 nov 2008, 09:05 #1
- Fecha de ingreso
- jun 2007
- País
- España
- Mensajes
- 40
Duda con etapa QSC MX1500a
Hola. Tenemos una pequeña duda con esta etapa:
http://www.dolphinmusic.co.uk/shop_i...38daad7f71.jpg
En el manual de instrucciones, respecto a los Inputs, dice lo siguiente:
An MXa amplifier features balanced inputs, connected via barrier strip terminals or ¼” tip/ring/sleeve phone jacks. The tip of the input jack is wired for “negative” or inverted polarity, while the ring is the non inverting input. Thus, if the voltage at the tip is positive with respect to that the ring, the amplifier channel will produce a negative voltage at its output.
For use with unbalances signals, connect the unused terminal to ground to avoid a reduction in gain caused by a floating input. Use a two-conductor (tip/sleeve) plug, or connect a jumper between the inverting input terminals on the barrier strip and their adjacent ground terminal.
Entonces, dice que para usar entradas balanceadas, la señal ha de estar en el anillo y el negativo en la punta?. Al reves que "casi siemprer". no?
Cuando habla de usar entradas no-balanceadas, ya nos perdemos del todo.
Una ayudita, please.
Por cierto, que diferencia hay en usar entradas balanceadas y no balanceadas?
Gracias
Temas similares
-
Reparar qsc mx1500a
Everardo González en el foro FoRS PROResp.: 8Último mensaje: 10 jun 2009, 13:19 -
Duda utilización potencia Qsc 1400 series one made in Usa
Carlos A. Daza G. en el foro FoRS Semi-PROResp.: 11Último mensaje: 20 ene 2009, 21:28 -
Duda con amplificador qsc mod:cx1202v
Javier Virgen en el foro FoRS Semi-PROResp.: 2Último mensaje: 25 oct 2008, 09:39 -
Duda con etapa Roland SPA-240
Alfons Carmona en el foro FoRS Semi-PROResp.: 9Último mensaje: 24 jun 2007, 11:55 -
Duda con conexionado de cajas a etapa
Alfons Carmona en el foro FoRS Semi-PROResp.: 10Último mensaje: 20 jun 2007, 02:21
fotos del namm 2024
02 feb 2024, 10:32 en Comunicados del DoPA. Comentarios y sugerencias